Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will reduce costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good condition.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame that was previously installed easily. If you have double glazed window repair-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation, you will need to find some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you plan to try to remove the glass panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any shards fall onto the cloth instead of landing on the floor where they could be trodden under and cause further damage.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent drafts and water from entering the property until a professional is able to come out and fix the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may think about a security door that has an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. In time, Repairs to uPVC Windows they could develop a number of problems, including sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're satisfied with the fit of the window, tighten the screws to secure them in place.

If you can't reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen. The majority of the time, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and then perform an initial fitting. The corner joints of the sash should align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix that can be done by any skilled DIYer. Depending on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be put on. It is crucial to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with an ease. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The issue can be caused due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges can also become disaligned as a result of wear, causing a gap where the sash and frame meet. If they are beyond repair, it might be necessary to have them realigned. The interlock, which is located on the hinge side of the window, can be misaligned. Again, it is feasible to give them a thorough clean, however in certain cases, it may be necessary to have them replaced.

The next most common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to stop draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures and again will lessen draughts.

Another, and most effective ways to cut down on draughts is by using an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be put on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it could be more cost-effective to simply replace them rather than repair them. If you are experiencing issues with your upvc window, it's best to consult an expert as soon as you can.