Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as timber and aluminum.

It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. If you have double-paned windows that are joined by internal beading, it will be harder to remove and replace the old panes. In this instance you'll need locate some plastic spacers that assist the new pane to fit properly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass to ensure that any shards will fall on the fabric rather than on the floor where they could be trampled on and cause further damage.

It's a good idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your home until a professional is able to repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is large, you may be interested in a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. Over time, they can develop a variety of issues such as sliding. A sagging uPVC emergency window repair can cause issues with light, draughts, and even security. It is crucial to act when you realize that your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sliding. First, you'll need to unblock the windows to access the frame. Then, remove both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, Repairs to uPVC Windows shut your window and check for fit. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you can't reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to loose their elasticity. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and then perform an initial fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle, and then return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Windows that leak water do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Based on the severity of the issue the old caulking may require removal before a new layer is applied. It is essential to remember that when it is about uPVC window repairs to upvc windows you should not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce your energy efficiency.

Verify that the drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are other signs of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is more with the seal than the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze, it may be hinges that are at fault. They can be easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Like all mechanical parts, hinges can wear out over time. It's very simple to change a window hinge, but it's easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to provide advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. The ideal time to do this once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different things. The hinges may also become misaligned due to wear, causing a gap where the sash and frame meet. If they are beyond repair, it could be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window and can be misaligned. Again, it's possible to give them a clean but in some instances it could be necessary to have them replaced.

The next common reason for draughts is window seals. These are prone to wear or damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

Your windows made of upvc will remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.